• Suomi
  • English
  • Русский
  • Svenska

luminaire specific control

C2 SmartLight solution is presented at Vantaa Housing Fair

valon ohjaus

Klikkaa tästä suomenkieliseen tekstiin

On June 10th, with the opening of Vantaa Housing Fair, C2 SmartLight presents a new method to control lighting by a wireless push-button. A motion sensor is not an effective solution for playgrounds and sport areas, where people passing by may trigger the lighting at a time when it is not needed. The wireless push-button for switching the lighting on was designed in a close collaboration with our customers. Now everyone can switch the lights on on a playground – and only when the lighting is needed– without additional costs in maintenance, cabling or data communication.

The lighting solution can be tested at the Vantaa Housing Fair in Kvartsijuonenpuisto playground. There is a push-button at the entrance of the playground, and when pressed, the dimmed LED luminaires bright up. The LED luminaires are integrated with wireless C2 SmartLumo controllers, which allow users to setup effective schedules and monitor individual luminaires.

During the period of Housing Fair, the lighting is set to 10% of the luminaires’ power. By pressing the push-button, the lighting increases to full power for 1 minute, after which the luminaires are dimmed to 30% of power for 30 seconds. The luminaires return to pre-defined 10% as a default. Every visitor has a possibility to test the lighting control.

Residential area of Jyväskylä is illuminated according to different needs without switching off street lights

Asuntomessu Jyväskylä LED

Total luminaire specific control was deployed at Aijalanranta, residential area of Jyväskylässä.  In September over 1 000 inhabitants will settle in the new city area.

All lights of streets and pedestrian bridge, parks and playgrounds are controlled individually according to the needs. Nowadays city obtained 57% of energy savings from utilization  of smart control system in comparison with conventional methods of lighting control. Energy efficiency is reached by deploying LED luminaires, which provide lighting according to the needed lighting output at specific time and at specific place respectively. Street lighting of residential area is provided by 87W LED luminaires, which are equipped with  C2 SmartLight controller  which adjust output light power according to the application area. The lighting maintenance of the area became easier and maintenance costs decreased. In practice, maintenance organization does not need to think what type of luminaire should be installed here 40W, 60W or 80W luminaire. They change luminaires to luminaire of the same power and then it is automatically dimmed by control solution according to the required light output of this area.